Aeromotive
Aeromotive In-Line 5.0 Fuel Pump w/ Variable Speed Controller 11196
- PART NUMBER:
- 11196
- UPC:
- 684980010954
- MPN:
- 11196
- Availability:
- Ships from manufacturer
- Shipping:
- Free Over $98 In U.S. 48
- Type:
- Electric In-Line Fuel Pumps
- Finish:
- Brushless
- Inlet Port:
- ORB-12
- Outlet Port:
- ORB-10
- Notes:
- Not compatible with pulse modulated systems or fuel pump speed controllers.
Description
Aeromotive In-Line 5.0 Fuel Pump w/ Variable Speed Controller 11196
Brushless In-Line 5.0 Spur Gear Pump w/ Variable Speed Controller
Supports:
- Fuel injected engines: GAS
up to 3400 FWHP – naturally aspirated
up to 2600 FWHP – forced air induction - Carbureted engines: GAS
Up to 3600 FWHP – naturally aspirated
Up to 2700 FWHP – forced air induction - Fuel injected engines: E85
up to 2380 FWHP – naturally aspirated
up to 1820 FWHP – forced air induction - Carbureted engines: E85
Up to 2520 FWHP – naturally aspirated
Up to 1890 FWHP – forced air induction - Fuel injected engines: METHANOL
up to 1,190 FWHP – naturally aspirated
up to 910 FWHP – forced air induction - Carbureted engines: METHANOL
Up to 1,260 FWHP – naturally aspirated
Up to 945 FWHP – forced air induction
- E85 Compatible, reduce max FWHP by 30%
- Lighter than the traditional external mount pumps.
- Reduced current draw at higher, EFI pressures.
- Extended service life in methanol and ethanol.
- New integral spur-gear pumping mechanism.
- 90-PSI continuous operating pressure and up to 150-PSI peak pressure, base plus boost.
- Integral, external brushless controller for clean installation, cooler fuel and enhanced reliability.
- This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications.
- ORB-12 inlet and ORB-10 outlet ports.
- Requires straight 12-VDC to 16-VDC power supply.
- Not compatible with pulse modulated systems or fuel pump speed controllers.
Aeromotive’s True Variable Speed Controller offers the advantages of built-in pump speed control via a dedicated 0-5V analog DC input signal. The Controller capitalizes on our existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat the introduction of environmental via reduced fuel recycling.
EFI Rated flow of 1,700 lbs./hr. @ 40 psi, 13.5 volts
Carb Rated Flow of 1,850 lbs./hr. @ 9 psi, 13.5 volts
Warranty Information
Aeromotive Product Warranty, Policy and Procedure: Retail
All Aeromotive products sold are warranted free from defects in materials and workmanship for a period of one year from the original date of purchase. No warranty claim will be valid without authentic, dated proof of purchase.
This warranty is to the original retail purchaser and none other and is available directly from Aeromotive and not through any point of distribution or purchase.
If a defect is suspected, the retail purchaser must contact Aeromotive directly to discuss the problem, possible solutions and obtain a Return Goods Authorization (RGA), if deemed necessary by the company. All returns must be shipped freight pre-paid to the company and with valid RGA before they will be processed.
Aeromotive will examine any product returned with proper authorization to determine if the failure resulted from a defect or from abuse, improper installation, misapplication or alteration. Aeromotive will then, at its sole discretion return, repair or replace the product.
Limitation of Remedies
If any Aeromotive product is determined defective, buyer’s exclusive remedy is limited in value to the sale price of the good. In no event shall Aeromotive be liable for incidental or consequential damages. Aeromotive fuel system components are not legal for sale or use on emission controlled motor vehicles.
The telephone number to contact Aeromotive Returns and Repairs for help with a warranty claim is 913-647-7300, then dial option 3. Be certain to have the part in question, along with proof of purchase and a pen and paper when you call.
Aeromotive Product Warranty, Policy and Procedure: Distributor
Any product returned for warranty by a distributor, retailer or party that is NOT the actual retail purchaser, requires proper RGA and authentic proof of customer purchase. Authorized returns that do qualify as “in warranty and defective” will NOT be processed for credit, but handled as any other warranty return, where the product will be repaired if possible or replaced with rebuilt or new merchandise of equal performance and value. Returned product NOT “defective” or NOT “in warranty” will be destroyed or returned as-is, by distributor request.
New product returns for stock adjustment are allowed annually. All returned merchandise requires advance approval from Aeromotive along with the assigned RGA number. All returns for stock adjustment must be in perfect condition and if above 5% of annual sales orders, are subject to a 15% restocking fee. All returns will be for account credit only. Aeromotive does not make cash refunds.
View AllClose