BluePrint Engines Pro Series LS 376CI 495HP Base Dressed Crate Engine PSLS3762CTF

Description:

• Horsepower & Torque: 495 Horsepower / 490 FT LBS
• Compression Ratio: 10.7:1
• Aluminum Heads
• Hydraulic Roller Cam
• Nodular Iron Crankshaft
• Hypereutectic Pistons

Block:

• New GM Aluminum 6.2L Block
• OEM Block Machined in the USA
• Priority Main Oiling
• 4.0662" Bore
• 6-Bolt Main
• 1-Piece Rear Main Seal

Rotating Assembly:

• Nodular Iron Crankshaft
• 3.622" Stroke
• 6.098" Connecting Rods w/ 150,000 PSI Bolts
• Hypereutectic Pistons
• Internally Balanced

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads - PS8015
• 72cc Chamber
• 2.165" Intake / 1.600" Exhaust Valves
• 259cc Intake / 102cc Exhaust Runners

Cam Specs:

• Cam Type: Roller Cam
• .553 Intake / .553 Exhaust Lift
• 218 Intake / 224 Exhaust Duration
• @.050-113 Degree Lobe Separation, 110 ICL

Ignition Timing:

• Factory ECU with Professional Tuning 

Also Includes:

• Truck Intake Manifold
• Fuel Injectors and Rail
• Truck Water Pump
• Truck Harmonic Balancer 
• GM Muscle Car Swap Oil Pan (Customer may have to reuse existing pan and pickup)
• Coil Packs
• Spark Plugs and Wires

Engine Accessory Specs:

• Fuel Delivery Type: Fuel Injection
• Spark Plug: Champion 3015 / RS14PMC4
• Spark Plug Gap: .040"
• Harmonic Balancer: Non Weighted
• Flexplate/Flywheel: Non Weighted
• Stall Converter: 2100+
• Intake Manifold: N/A
• Fuel Recommendation: 91 Octane
• Timing (Initial/Total Advance):
• Firing Order: 1,8,7,2,6,5,4,3
• Notes: Recommended break in oil for your BluePrint Crate Engine: BPP710
• Engine features a 58x reluctor wheel and 4x cam sensor. Knock sensor provision located on side of block. Cam sensor located in timing cover. utilizes EV6 type injector

Notes:

• This engine was designed and tested in a 2008 GM 4WD SUV with the provided truck intake manifold injectors, rail, water pump, and harmonic balancer.
• Will work with stock torque converter, but 2100 stall is recommended for peak performance.
• Engine is specifically designed for truck use with a truck profile camshaft, however, is not intended for heavy duty towing.
• This engine features a 58X crank reluctor and 4X crank window. May work in pre 2007 LS trucks, with crank signal converter and other accommodations.
• This should be considered a professional level install and WILL require professional level tuning.
• The following accommodations should be expected, and fully understood
• Provided oil pan may need changed to customers oem pan, pending vehicle year.
• Reuse of factory throttle body is recommended; however an adapter may be required.
• Sensor location, deletion, and wiring harness modifications may be required.
• PCV rerouting, steam port path, fuel lines, and air intake may require modification
• This engine does NOT feature AFM, DOD, VCT, VVT. These features will need tuned out of factory ECU.

BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. The warranty applies to individual or professional installations and is fully transferable.

Every BluePrint engine is Dyno tested and has strict parameters to pass and
be shipped to the customer. All parts are tested before being released for production:
• DC and Pneumatic assembly tools calibrated daily
• Fatigue Testing
• Durability Testing
• Random subassembly testing
• Quality system is ISO 9001: 2015 certified
• Traceable engine “DNA” electronic barcode record keeping of
manufacturing and performance data