BluePrint Engines Pro Series LS 376CI 700HP Deluxe Dressed Crate Engine Supercharged w/Natural Pulley Kit PSLS3769SCTK

Description:

• Horsepower & Torque: 700 Horsepower / 640 FT LBS
• Compression Ratio: 9.5:1
• Aluminum Heads
• Hydraulic Roller Cam
• Nodular Iron Crankshaft
• Forged Pistons

Block:

• BluePrint Engines High Strength Cast Iron 6.2L Block
• Increased Deck Thickness and Strength Webbing
• Extended Cylinder Skirt
• Priority Main Oiling
• 4.070" Bore
• 6-Bolt Main
• 1-Piece Rear Main Seal
• Improved Water Jacket Design

Rotating Assembly:

• Nodular Iron Crankshaft
• 3.622" Stroke
• Forged 6.125" Connecting Rods w/ 150,000 PSI Bolts
• Forged Pistons
• Internally Balanced Front and Rear

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads - PS8015
• 70cc Chamber
• 2.165" Intake / 1.600" Exhaust Valves
• 259cc Intake / 102cc Exhaust Runners

Cam Specs:

• Hydraulic Roller
• .612 Intake / .585 Exhaust Lift
• 225 Intake / 238 Exhaust Duration
• @.050-113 Degree Lobe Separate

Also Includes:

• Holley Terminator X Max - Gen IV Complete ECU/Harness EFI System
• Coil Packs
• Valve Covers
• Oil Pan
• All Sensors Required for Engine to Run
• Drive by Wire Throttle Body
• Throttle Pedal
• Timing Cover
• Spark Plugs & Wires
• Harmonic Balancer
• Front Accessory Drive with Power Steering Pump, Water Pump, Alternator, and Air Compressor

Engine Accessory Specs:

• Fuel Delivery Type: Magnuson TVS2650 Supercharger
• Spark Plug: NGK 3689 (TR6IX)
• Spark Plug Gap: .030"
• Harmonic Balancer: Non-Weighted
• Flexplate/Flywheel: Non-Weighted BPP12654640 - BPPLS1611
• Stall Converter: 2200+
• Intake Manifold: Magnuson Supercharger
• Fuel Recommendation: 91 Octane
• Timing (Initial/Total Advance): ECM Supplied with Calibration
• Firing Order: 1,8,7,2,6,5,4,3

Notes:

• BluePrint Engines Recommends Air Intake Kit BPPLS01013 to ensure correct MAF calculations and Dyno calibration are maintained with the above ECU / tuning. 
• Recommended break in oil for your BluePrint Crate Engine: BPP710
• Engine features a 58x reluctor wheel and 4x cam sensor. Knock sensor provision located on side of block. Cam sensor located in timing cover. utilizes EV6 type injector

BluePrint engine the industry's best-in-class warranty for 30-months / 50,000 miles — with the extra confidence only BluePrint can provide. The warranty applies to individual or professional installations and is fully transferable.

Every BluePrint engine is Dyno tested and has strict parameters to pass and
be shipped to the customer. All parts are tested before being released for production:
• DC and Pneumatic assembly tools calibrated daily
• Fatigue Testing
• Durability Testing
• Random subassembly testing
• Quality system is ISO 9001: 2015 certified
• Traceable engine “DNA” electronic barcode record keeping of
manufacturing and performance data