HAYS CLUTCHES
Hays 2400-2800 Stall 4L60E/4L65E 3/4 Race Converter 97-1H24Q
- PART NUMBER:
- 97-1H24Q
- UPC:
- 90127017364
- MPN:
- 97-1H24Q
- Availability:
- Ships from Manufacturer
- Shipping:
- Free Over $98 In U.S. 48
- Type:
- 4L60E/4L65E Torque Converters
- Transmission:
- 4L60E/4L65E
- Stall Speed (RPM):
- 2400 - 2800
- Diameter (in.):
- 9.600"
- Balanced:
- Yes
- Input Shaft:
- 30-Spline
- Crank Pilot Diameter:
- 1.703"
- Bolt Pattern:
- 11-1/8"
- Lockup:
- Yes
- Anti-Ballooning Plate:
- No
- Mounting Hardware Included:
- No
- Use with Power Adder:
- No
- Use with Trans-Brake:
- No
- Notes:
- For LS Engines Only
- Notes:
- Requires Bolt Size: 3/8-16 x 3/4" in Grade 8
On Sale
Description
Hays 2400-2800 Stall 4L60E/4L65E 3/4 Race Converter 97-1H24Q
Features:
- 3/4 Race series converters are built, tested, and proven to support up to 650 HP.
- State of the art Spray Welding process is used in select areas. Spray Welding provides clean, strong and consistent fusion while also increasing strength through hardening from higher process temperature
- Each converter is hand-built and inspected in every step of assembly to ensure top of the line quality
- All HAYS converters are internally welded compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency
- Heavy duty Torrington bearings are used for greater strength and durability
- Stators are chosen with high flow vents and channels to promote cooling in heat producing higher horsepower applications
- Increased horsepower and acceleration due to a weight saving, one application design. Almost all HAYS converters are built for one application to reduce weight compared to a multi-bolt pattern converter.
- 3/4 Race series converters are offered in several different stall speeds for GM, Ford, and Chrysler transmissions
- Industry leading Tech Support Team is available to provide assistance with stall speed selection
Warranty Information
All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise
transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or
implied beyond this Limited Warranty.
In the event of an alleged defect in material or workmanship, Holley Performance Products???????????????? responsibility is strictly limited to repair or replace the
defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance
Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential
or other damages incurred by use of any product of Holley Performance Products.
To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed
applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products
directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance
Products.
This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This
Limited Warranty supersedes all prior warranty statements.
HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND ??????????????? NEW PRODUCT
Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and
workmanship for a period of 90 days from date of purchase.
Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected
to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty
repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant,
and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of
purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat
encountered during engine break-in or if used during any racing activity.
View AllClose