HOLLEY
Holley Gen V LT Power Steering Add-On System Wet Sump 20-222 - Cast
- PART NUMBER:
- 20-222
- UPC:
- 090127055021
- MPN:
- 20-222
- Availability:
- Ships from Manufacturer
- Shipping:
- Free Over $98 In U.S. 48
- Type:
- Power Steering Add-On Kit
- Pulley Style:
- Serpentine
- Power Steering Pump Included:
- Yes
- Power Steering Pump Reservoir Included:
- No
- Power Steering Pulley Included:
- Yes
- Alternator Included:
- No
- Alternator Pulley Included:
- Yes
- A/C Compressor Included:
- No
- A/C Compressor Pulley Included:
- No
- A/C Compressor Type:
- N/A
- Tensioner Included:
- No
- Belt Included:
- Yes
- Quantity:
- Sold as a Kit
Description
Holley Gen V LT Power Steering Add-On System Wet Sump 20-222 - Cast
Hydraulic Power Steering Add-on System for LT4 Wet Sump Engines
Looking to put an LT4/LT5 crate motor or junkyard motor into your vehicle originally equipped with hydraulic power steering? The Holley Retro-fit Hydraulic Power Steering add-on kits for GM LT4/LT5 engines to the rescue. The hydraulic power steering kits works with original equipment GM LT4/5 accessories and brackets. The design incorporates a splined dual bearing system that eliminates belt stresses on the P/S pump's internal bearings, assuring long life. The supercharger drive maintains the original and optimized belt path and tensioner. Included with each P/S system is a throttle body angle correcting adapter that better positions the TB for swap applications. Versions of the power steering drives are available for LT4/5 dry-sump & LT4 wet-sump applications. Patent - www.holley.com/patents/
Features:
- Add-on power steering to the OE GM accessory drive systems
- Power Steering design with splined dual bearing eliminating stress on belt and pump's internal bearings
- Original equipment Type II power steering pump included for OE (original equipment) looks and reliability
- P/S hard line adapters included
- Throttle body angle correcting adapter for easier intake tube routing on swap applications included
- These retro-fit kits maintain OE pulley ratios for optimal accessory performance
- Retro-fit kits allows for installation and use of larger supercharger crank pulley of 15% overdrive or 9.44” diameter
- Available LT4/5 dry-sump & LT4 wet-sump applications
A/C Compressor Included | No |
---|---|
Accessory Drive Style | Power Steering Add-On |
Alternator Included | No |
Application | GM Gen V LT4 |
Belt Included | Yes |
Brand | Holley |
Category Filter | Engine Swap Components |
Choose Your Part | Accessory Drive Kits |
Clearance Category | Engine Swap Components |
Damper Included | No |
Damper Style | Factory |
Emission Code | 5 |
Engine | GM Gen V LT4 |
Finish | Cast |
Material | Cast Aluminum |
Oil System Type | Wet Sump |
Power Steering Hardline Included | Yes |
Power Steering Pulley Included | Yes |
Power Steering Pump Included | Yes |
Power Steering Reservoir Included | No |
Product Type | Accessory Drive Kits |
Pulley Style | Serpentine |
Tensioner Included | No |
Thermostat Included | No |
Warranty | Limited 90 Day |
Water Neck Included | Yes |
Water Pump Included | Yes |
Water Pump Pulley Included | Yes |
UPC | 090127055021 |
Part Number | 20-222 |
Warranty Information
All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty.
In the event of an alleged defect in material or workmanship, Holley Performance Products responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential
or other damages incurred by use of any product of Holley Performance Products.
To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance
Products.
This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.
HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND NEW PRODUCT
Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase.
Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant,
and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose