Description
Holley LS High-Mount Accessory Drive Bracket Install Kit F-Body/GTO - Middle Belt 21-2
Installation Kit, LS Acc. Drive Brackets, use with MIDDLE belt alignment (alignment common on F-body & GTO)
Holley accessory drive installation kits provide proper spacing for Holley A/C, P/S & Alt accessory drive brackets, so belts ride at the perfect distance on your particular engine.
A Fitment And Required Components Guide helps you locate and source components and provides other notes and helpful hints to figure your distance. Three easy steps will get you going. Step one is to determine your belt alignment based on your crank pulley position on the engine you have. Step two is to choose the Holley accessory drive brackets that you need (A/C, Alt & P/S or both). Step three is to see which Holley installation kit your set-up requires to line up your accessories with your crank pulley position. An application specific installation kit (part # 21-1, 21-2, or 21-3) is REQUIRED for most applications.
Accessory Drive Style | High-Mount |
Belt Alignment | Middle |
Brand | Holley |
Emission Code | 5 |
Engine | GM Gen III/IV (LS Based) |
Finish | Cast |
Material | Aluminum |
Product Type | Accessory Bracket |
Thickness | 0.866" Drivers Side |
| 1.397" Passenger Side |
Warranty | Limited 90 Day |
UPC | 090127682135 |
Part Number | 21-2 |
Bolts that come with the spacer kits (21-1, 21-2, & 21-3) are not sold separately.
View AllClose
Warranty Information
All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or implied beyond this Limited Warranty.
In the event of an alleged defect in material or workmanship, Holley Performance Products responsibility is strictly limited to repair or replace the defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential
or other damages incurred by use of any product of Holley Performance Products.
To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance
Products.
This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This Limited Warranty supersedes all prior warranty statements.
HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND NEW PRODUCT
Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and workmanship for a period of 90 days from date of purchase.
Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant,
and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat encountered during engine break-in or if used during any racing activity.
View AllClose