null

HOOKER BLACKHEART

Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish

PART NUMBER:
BHS5192
MPN:
BHS5192
Availability:
Ships from Manufacturer
Shipping:
Free Over $98 In U.S. 48
Type:
LT Swap Exhaust Manifolds
Application:
Multi-Fit
Material:
Stainless Steel
Finish:
Natural
Engine:
Gen V (LT Based)
Collector Dia. (In.):
2-1/2
Primary Tube Dia. (In.):
1-3/4
Bolt Size:
M8 x 1.25 x 25mm
Mounting Hardware Included:
Yes
  • Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish (BHS5192)
  • Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish (BHS5192)
  • Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish (BHS5192)
  • Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish (BHS5192)
  • Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish (BHS5192)
$394.95

Description

Hooker Blackheart Gen V LT-Swap Exhaust Manifolds - 2.50" Rear Dump / Natural Finish

Hooker BlackHeart cast iron rear dump exhaust manifolds have a 2.50-inch outlet and may fit where our standard LS and LT swap manifolds will not. These differ in that they exit in a straight down fashion much like a block hugger header but exit more toward the rear than our center dump manifolds. Expect less under hood noise than traditional headers alongside a construction and finish that will hold up to the most hostile of environments.

Features/Benefits:

  • Intended for GM Gen III/IV LS and Gen V LT engine swap applications where durability, quiet operation, and leak-free sealing is desired
  • Tight tuck design that provides a more forward and downward exit compared to standard swap manifolds
  • 2.50-inch outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold
  • Cast from Hi-Silicon-Moly Ductile Iron to provide durability and corrosion resistance
  • Available in plain as-cast finish, black ceramic, and silver ceramic
  • Perfect complement to Hooker engine swap mount plates and Holley engine swap oil pans
  • Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included
  • Similar to SBC driver side manifold (HKR8525) - same exit centerline but raised up 1.36-inches

If you have an application or swap project where our existing LS and LT swap manifolds don’t quite fit or you need an exit point further forward to avoid the steering shaft, a starter, or other component, these new “rear dump” cast iron swap manifolds may be what you’re looking for. Cast out of the same Hi-Silicon-Moly Ductile Iron as the 8502HKR and BHS516 lineup, it will be tough to find a more durable, streamlined, and quiet exhaust option. Available in natural cast, silver ceramic, or black ceramic finishes, these manifolds are offered with flanges, gaskets, and flange hardware for connecting to the Holley lineup of adapter pipe kits which easily allow the addition of catalytic converters and connect to Holley's many exhaust system options.

View AllClose

Warranty Information

Hooker BLACKHEART 304 stainless steel exhaust products are covered by a limited lifetime warranty that covers certain defects in workmanship and materials. Who is covered? This warranty covers the original purchaser of Hooker BLACKHEART 304 stainless steel exhaust products in the United States and Canada. What is covered and for how long? Holley Performance Products Inc. (Holley) warrants that Hooker BLACKHEART 304 stainless steel exhaust products will be free from defects in material and workmanship for the life of the product on the original car on which it was installed. Blemishes, marring of appearance, discoloration, internal rust, or surface rust due to weather, road hazards, lack of maintenance, or extremes of heat of cold are not be considered defects under this Limited Lifetime Warranty. Holley warrants moving parts such as valves and actuators for three years. All claimed warranty products must have a return goods authorization (RGA) number and shipped to Holley at the buyers expense. The returned product must be accompanied with a copy of the original purchase receipt and the original purchasers contact information. What will Holley do? If there is a defect in material or workmanship, Holley will choose either to repair the defective part or replace it with a comparable, new part, without charge for the repair or the replacement product. Purchasers remedies under this Limited Lifetime Warranty are strictly limited to the repair or replacement of the defective product. You must pay the cost of shipping the product back to Holley and for any labor or other costs, including any additional parts, associated with removing the allegedly defective part and with the installation of the repaired or replacement part. What is NOT covered? This warranty does not cover Hooker BLACKHEART stainless steel products that have been installed on any commercial or racing vehicle or that have been damaged due to misuse, abuse, neglect, or accident, such as having been modified or altered; improperly installed, adjusted or repaired; welded; exposed to corrosion, corrosive materials, other contaminants; or used in applications other than those recommended by Hooker on our website (www.holley.com). How do I start the warranty claim process? To initiate the return process under this Limited Lifetime Warranty, please contact our customer service team immediately at 800-638-0032 and hit customer service option or email at holleyorders@holley.com for complete Hooker BLACKHEART product return instructions and to request a Return Goods Authorization (RGA) Number. Please be prepared to return the allegedly defective product to Holley, along with a copy of the original dated purchase receipt. Holley reserves the right to reject a warranty claim if you cannot establish date of purchase. Final warranty determination is at the sole discretion of Holley. Should I use Header Wraps? If you choose to use header wraps, you will void your Warranty. Header wraps cause fatigue in the primary tubes and create fractures in the metal. What other conditions and exclusions apply? This warranty does not provide compensation for loss of time, loss of use of vehicle, labor cost, cost of additional parts, shipping, inconvenience or other consequential or incidental damage. Some states do not allow the exclusion or limitation of incidental or consequential damages, so these limitations or exclusions may not apply to you. Holleys maximum liability under this Limited Lifetime Warranty shall not exceed the original cost of the product to the consumer. This Limited Warranty gives you specific legal rights and you may also have other rights which vary under state or provincial laws. This Limited Warranty is exclusive and in lieu of all others, whether oral or written and whether express or implied. Any implied warranties, including implied warranties of merchantability and fitness for a specific purpose are hereby disclaimed. Some states do not allow the exclusion or limitation of implied warranties, so these exclusions or limitations may not apply to you.
View AllClose