HOOKER BLACKHEART
Hooker LS/LT Swap Transmission Crossmember - BHS549
- PART NUMBER:
- BHS549
- UPC:
- 90127105351
- MPN:
- BHS549
- Availability:
- Ships from Manufacturer
- Shipping:
- Free Over $98 In U.S. 48
- Type:
- LS/LT Swap Transmission Crossmembers
- Material:
- Steel
- Finish:
- Black Powdercoated
On Sale
Description
Hooker LS/LT Swap Transmission Crossmember - BHS549
1973-1987 GM C-10/15 2WD, LS/LT swap 4L80 Transmission Crossmember - Also Fits 1979-1987 C20 2WD & 1973-1982 Blazer/Jimmy 2WD
These new crossmembers have been redesigned and are less expensive than the previous crossmember & work with engine mounting brackets BHS540 for both the GM LS & Gen-V LT engines. Choose the crossmember based on the transmissions that you want to run in your 1973-1987 C10: • Crossmember BHS548 fits 4L60E, 4L65E, 4L70E, 4L75E, and 6L80 Transmissions • Crossmember BHS549 fits 4L80E, and 4L85E Transmissions • Crossmember BHS550 fits T56, and T56 Magnum Transmissions These crossmembers, when used with BHS540, provide the ideal u-joint angles and the best clearance for 3.00" dual exhaust.
Features:
- Revised Design with Lower Pricing
- Fits 1973-1987 C10/15 2WD, 1979-1987 C20 2WD & 1973-1982 Blazer/Jimmy 2WD
- LS/Gen-V LT Swap Transmission Crossmembers
- Designed for Use with All 1973-1987 C10 LS/Gen-V LT Swap Components
- Use with BHS540 Engine Mounting Brackets (Also Works with 12621HKR)
- Designed Using CAD Modeling/FEA Analysis for Optimal Strength, Weight, Safety & Appearance
- Welded Steel Construction w/ Black Powder Coated Finish
- Provides an Optimum Engine/Transmission Inclination Angle That is Critical to Obtain Suitable U-Joint Working Angles, when installed with BHS540 Engine Mounting Brackets
- Designed in Conjunction with Other Hooker Blackheart C10 Engine Swap Parts to Provide Bolt-in Installation of Hooker LS and LT Swap Manifolds and Exhaust Systems for this Application
- Provides the Highest Clearance Available for up to 3.00” Exhaust System
New Headers are being developed for use with these crossmembers and the engine mounting brackets BHS540. BHS540 can be used for both LS & Gen V LT swaps using the proper clamshell mounts to fit the engine. The existing headers fit these crossmembers when used with LS swap mounts 12621HKR. These Crossmembers Along with Engine Mounting Brackets BHS540 work with LS Cast Exhaust Manifolds: 8501HKR, 8501-1HKR, 8501-3HKR, 8501-4HKR, 8501-5HKR, 8502HRK, 8502-1HKR, 8502-3HKR, 8502-4HKR, 8502-5HKR, 11730FLT, 11730-1FLT, or 11730-3FLT. These Crossmembers Along with Engine Mounting Brackets BHS540 work with Gen-V LT Cast Exhaust Manifolds: BHS516, BHS517, or BHS518. Application Specific Headers Will Be Available Soon for these Mounts
Application | 1973-1987 Chevrolet / GMC C10 Series Truck |
---|---|
Brand | Hooker BlackHeart |
Choose Your Part | Crossmember |
Color | Black |
Emission Code | 6 |
Engine | GM Gen III/IV (LS) |
Finish | Black Powdercoated |
Material | Steel |
Motor Type | GM LS |
GM LT | |
Product Type | Transmission Crossmember |
Transmission | 4L80E |
4L85E | |
Type of Component | Crossmember |
UPC | 090127105351 |
Part Number | BHS549 |
Hardware:
- 1 Center Crossmember
- 4 1/2" Bolts and Nuts
- 1 Left Side Mounting Bracket
- 4 3/8” Bolts and Nuts
- 1 Right Side Mounting Bracket
Videos
View AllCloseWarranty Information
Hooker BLACKHEART 304 stainless steel exhaust products are covered by a limited lifetime warranty that covers certain
defects in workmanship and materials.
Who is covered?
This warranty covers the original purchaser of Hooker BLACKHEART 304 stainless steel exhaust products in the United States
and Canada.
What is covered and for how long?
Holley Performance Products Inc. (Holley) warrants that Hooker BLACKHEART 304 stainless steel exhaust products will be
free from defects in material and workmanship for the life of the product on the original car on which it was installed.
Blemishes, marring of appearance, discoloration, internal rust, or surface rust due to weather, road hazards, lack of maintenance,
or extremes of heat of cold are not be considered defects under this Limited Lifetime Warranty. Holley warrants moving parts
such as valves and actuators for three years. All claimed warranty products must have a return goods authorization (RGA)
number and shipped to Holley at the buyers expense. The returned product must be accompanied with a copy of the original
purchase receipt and the original purchasers contact information.
What will Holley do?
If there is a defect in material or workmanship, Holley will choose either to repair the defective part or replace it with a
comparable, new part, without charge for the repair or the replacement product.
Purchasers remedies under this Limited Lifetime Warranty are strictly limited to the repair or replacement of the defective
product. You must pay the cost of shipping the product back to Holley and for any labor or other costs, including any additional
parts, associated with removing the allegedly defective part and with the installation of the repaired or replacement part.
What is NOT covered?
This warranty does not cover Hooker BLACKHEART stainless steel products that have been installed on any commercial or
racing vehicle or that have been damaged due to misuse, abuse, neglect, or accident, such as having been modified or altered;
improperly installed, adjusted or repaired; welded; exposed to corrosion, corrosive materials, other contaminants; or used in
applications other than those recommended by Hooker on our website (www.holley.com).
How do I start the warranty claim process?
To initiate the return process under this Limited Lifetime Warranty, please contact our customer service team immediately at
800-638-0032 and hit customer service option or email at holleyorders@holley.com for complete Hooker BLACKHEART
product return instructions and to request a Return Goods Authorization (RGA) Number. Please be prepared to return the
allegedly defective product to Holley, along with a copy of the original dated purchase receipt. Holley reserves the right to reject
a warranty claim if you cannot establish date of purchase. Final warranty determination is at the sole discretion of Holley.
Should I use Header Wraps?
If you choose to use header wraps, you will void your Warranty. Header wraps cause fatigue in the primary tubes and create
fractures in the metal.
What other conditions and exclusions apply?
This warranty does not provide compensation for loss of time, loss of use of vehicle, labor cost, cost of additional parts,
shipping, inconvenience or other consequential or incidental damage. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so these limitations or exclusions may not apply to you.
Holleys maximum liability under this Limited Lifetime Warranty shall not exceed the original cost of the product to the
consumer. This Limited Warranty gives you specific legal rights and you may also have other rights which vary under state or
provincial laws.
This Limited Warranty is exclusive and in lieu of all others, whether oral or written and whether express or implied. Any
implied warranties, including implied warranties of merchantability and fitness for a specific purpose are hereby
disclaimed. Some states do not allow the exclusion or limitation of implied warranties, so these exclusions or limitations may
not apply to you.
View AllClose