Description
Hurst 8-Foot Quarter Stick/Dual Gate Grey Shifter Cable 5000028
For Hurst Quarter Stick, Quarter Stick 2, Auto Stick 3, Lightning Rods and Dual Gate 2 shifters.
This is our hard-core Super Duty Race 12-ft shifter cable for most B&M shifters. It's properly clearanced to reduce backlash and has a large .375-inch 'long-lay' (stiffer, less prone to kinking) outer jacket for durability and dependability. The cable features an eyelet at one end to connect to the shifter, and a 10-32 threaded end at the transmission side of the cable and has a 2.50-inch stroke. This is the standard cable supplied in the box when you purchase a B&M Race shifter. Note: Does not fit B&M shifters manufactured before 1981, or B&M Unimatic shifters.
- Features a Large .375 Diameter Cable Housing
- Comes Standard with Most B&M Race Shifters
- Less Than 0.015 in./ft. Backlash
- Pre-lubed for Smooth Operation
- 1000 lbs. Pull Strength
- Rotary Swaged Ends
8-foot single eyelet on one end/threaded on the other. Fits all Hurst Quarter Stick, Quarter Stick 2, Auto Stick 3, Lightning Rods and Dual Gate 2 shifters.
View AllClose
Warranty Information
All Holley Performance Products Limited Warranties are extended to the original consumer only. This Limited Warranty is not assignable or otherwise
transferable. There are no warranties that extend beyond those stated herein. Holley Performance Products offers no other warranties expressed or
implied beyond this Limited Warranty.
In the event of an alleged defect in material or workmanship, Holley Performance Products responsibility is strictly limited to repair or replace the
defective product. Holley has no other obligation expressed or implied. Final warranty determination will be in the sole discretion of Holley Performance
Products. Holley shall not be responsible for; (a) actual or alleged labor, transportation, or other incidental charges; or (b) actual or alleged consequential
or other damages incurred by use of any product of Holley Performance Products.
To initiate the warranty process, the consumer must return the alleged defective product to the place of purchase with a dated receipt and completed
applicable warranty claim tag. Warranty claims will be rejected if the date of purchase cannot be established by the consumer. Do not send products
directly to Holley Performance Products. Holley Performance Products assumes no responsibility for products sent directly to Holley Performance
Products.
This Limited Warranty sets forth specific legal rights. The consumer may have other rights as a result of variations in state laws or provincial laws. This
Limited Warranty supersedes all prior warranty statements.
HOLLEY/FLOWTECH/HOOKER/NOS/WEIAND ??????????????? NEW PRODUCT
Holley Performance Products warrants its new Holley, Flowtech, Hooker, NOS, and Weiand products to be free from defects in material and
workmanship for a period of 90 days from date of purchase.
Holley Performance Products Limited Warranty specifically does not apply to products, which have been (a) modified or altered in any way; (b) subjected
to adverse conditions, such as misuse, neglect, accident, improper installation or adjustment, dirt or other contaminants, water, corrosion, or faulty
repair; or (c) used in other than those applications recommended by Holley Performance Products. Holley Performance Products also does not warrant,
and disclaims all liability for products used in racing activities and/or applications other than those specifically recommended in the current brand catalog.
Holley limits the warranty on Metallic Ceramic Coatings to be free from defects in material and workmanship for a period of 90 days from the date of
purchase. This limited coating warranty does not apply to any products which have been subjected to adverse conditions, such as high heat
encountered during engine break-in or if used during any racing activity.
View AllClose