MSD PERFORMANCE
MSD Atomic AirForce 103mm LS1/2/6 Intake Manifold Polymer 27023
- PART NUMBER:
- 27023
- UPC:
- 85132270231
- MPN:
- 27023
- Availability:
- Ships from Manufacturer
- Shipping:
- Free Over $98 In U.S. 48
- Type:
- Cathedral Port Intake Manifolds
- Throttle Body Inlet Bore:
- 103mm
- Material:
- Polymer
- Logo Color:
- Black
- Porting Ability:
- Yes
- Nitrous Bungs:
- Yes
- Fuel Rail Fitment:
- Factory and Aftermarket
Description
MSD Atomic AirForce 103mm LS1/2/6 Intake Manifold Polymer 27023
Performance, polymer intake manifold for GM LS1, LS2 and LS6 engines.
The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails*. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package.
Features:
- CARB Approved, 50 State Legal EO# D-722-3
- Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths
- The two-piece manifold design provide convenient access to the runners for porting
- Direct flow path runner design promotes maximum airflow
- 103mm Throttle bore allows the use of large throttle bodies for greater air flow
- Polymer material resists heat soak and minimizes weight
- Allows for the use of stock, and aftermarket fuel rails
- Available with Red, Black or Silver logos
Brand | Atomic |
---|---|
C.A.R.B. EO # | D-722-3 |
Color | Black |
Construction | Polymer |
Emission Code | 1 |
Engine | GM LS1/LS2/LS6 |
Finish | Black |
Fuel System Type | EFI |
Injector Style Provision | LS3/L92 EV6 USCAR |
Installed Height | 7.375" |
Plenum Volume with Runners | 11.59L (707.27 c.i.) |
Plenum Volume without Runners | 215.6mm (8.49in) |
Product Type | Intake Manifold |
Recommended Use | Forced Induction |
RPM Power Band | 1500-6500 RPM |
Throttle Bore | 103mm |
Warranty | Limited 1 Year Warranty |
UPC | 085132270231 |
Part Number | 27023 |
Parts Included:
- 1 – Intake Manifold Assembly
- 1 – Plenum Seal1
- 4 – M6x1.0x30mm Socket Head Cap Screw1
- 4 – ID6.4 xOD17x3mm Thick Flat Washer1
- 3 – Plenum Post Seals1
- 6 – ID8.4 xOD20x2mm Thick Flat Washer1
- 6 – M6x1.0 w/8mm x 8mm Shoulder1
- 1 – Vacuum Cap, ID5.9mm x 12.7mm L1
Seal Kit:
- 10 – Silicone O-ring, 3/32 W, -108
- 8 – Intake Port Seals
- 1 – Throttle Body Seal
1 – Fastener Kit:
- 10 – M6x1.0x30mm Socket Head Cap Screw (Short Pinch Bolt)
- 18 – ID6.4xOD17x3mm Thick Flat Washer
- 2 – M6x1.0x45mm Socket Head Cap Screw (Long Pinch Bolt)
- 10 – ID6.4xOD12.5x1.4mm Thick Flat Washer
- 3 – 14mm Torx-Head Plastite Screw (Cable Bracket, EGR)
- 1 – M6x1.0 Square Nut (Throttle Cable Bracket)
- 10 – M6x1.0x<> Socket Head Cap Screw (Cylinder Head)
- <> = 100mm for 2701,27013, 27014
- <> = 110mm for 2702
- 4 – M6x1.0x40mm Socket Head Cap Screw (Electronic Throttle Body only)
Videos
View AllCloseWarranty Information
MSD warrants this product to be free from defects in material and workmanship under its
intended normal use*, when properly installed and purchased from an authorized MSD dealer,
for a period of one year from the date of the original purchase. This warranty is void for any
products purchased through auction websites. If found to be defective as mentioned above,
it will be repaired or replaced at the option of MSD. Any item that is covered under this
warranty will be returned free of charge using Ground shipping methods.
This shall constitute the sole remedy of the purchaser and the sole liability of MSD. To the
extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied, including any implied warranty of merchantability or
fitness. In no event shall MSD or its suppliers be liable for special or consequential damages.
* Intended normal use means that this item is being used as was originally intended and for the original
application as sold by MSD. Any modifications to this item or if it is used on an application other than what
MSD markets the product, the warranty will be void. It is the sole responsibility of the customer to determine
that this item will work for the application they are intending. MSD will accept no liability for custom applications.
View AllClose