null

MSD PERFORMANCE

MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701

PART NUMBER:
2701
UPC:
85132027019
MPN:
2701
Availability:
Ships from Manufacturer
Shipping:
Free Over $98 In U.S. 48
Type:
LS7 Intake Manifolds
Throttle Body Inlet Bore:
103mm
Material:
Polymer
Logo Color:
Red
Porting Ability:
Yes
EGR:
No
Nitrous Bungs:
Yes
Fuel Rail Fitment:
Factory and Aftermarket
Notes:
Use of aftermarket rails may require the use of customer-supplied spacers and hardware.
On Sale
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
  • MSD Atomic AirForce 103mm LS7 Intake Manifold Polymer 2701
Now: $1,153.95
Was: $1,281.95

Description

MSD Atomic AirForce 103mm LS7 Intake Manifold 2701

Performance Polymer Intake Manifold for GM LS7 Engines

The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines. The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting. Atomic AirForce accepts an OEM or 103mm throttle body as well as stock or aftermarket fuel rails* including MSD's Atomic LS EFI system. The intake bolts on and is supplied with new gaskets and hardware for a direct bolt-on package. *Note: Use of aftermarket rails may require the use of customer-supplied spacers and hardware.

Features:

  • CARB Approved, 50 State Legal EO# D-722-3!
  • Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths.
  • The two-piece manifold design provide convenient access to the runners for porting.
  • Direct flow path runner design promotes maximum airflow.
  • 103mm Throttle bore allows the use of large throttle bodies for greater air flow.
  • Polymer material resists heat soak and minimizes weight.
  • Allows for the use of stock fuel rails,aftermarket rails including the Atomic LS EFI.
  • Available with Red, Black or Gray logos
  • Power Gains of 36 horsepower and 16 pound feet of torque when tested with LS7 manifold on Lingenfelter LPE L28 Camaro engine versus stock manifold.
Note: Use of aftermarket rails may require the use of customer-supplied spacers and hardware.

Brand Atomic
C.A.R.B. EO # D-722-3
Color Black / Red
Construction Polymer
Emission Code 1
Engine GM LS7
Fuel System Type EFI
Injector Style Provision LS3/L92 EV6 USCAR
Plenum Volume with Runners 12.08L (737 c.i.)
Plenum Volume without Runners 236.2mm (9.29in)
Product Type Intake Manifold
Recommended Use Forced Induction
RPM Power Band 1500-6500 RPM
Sale Category Air and Fuel Delivery
Throttle Bore 103mm
Warranty Limited 1 Year Warranty
UPC 085132027019
Part Number 2701

Parts Included:

  • 1 – Intake Manifold Assembly
  • 1 – Plenum Seal
  • 4 – M6x1.0x30mm Socket Head Cap Screw
  • 4 – ID6.4 xOD17x3mm Thick Flat Washer
  • 3 – Plenum Post Seals
  • 6 – ID8.4 xOD20x2mm Thick Flat Washer
  • 6 – M6x1.0 w/8mm x 8mm Shoulder
  • 1 – Vacuum Cap, ID5.9mm x 12.7mm 

1 – Seal Kit

  • 10 – Silicone O-ring, 3/32 W, -108
  • 8 – Intake Port Seals
  • 1 – Throttle Body Seal

1 – Fastener Kit

  • 10 – M6x1.0x30mm Socket Head Cap Screw (Short Pinch Bolt)
  • 18 – ID6.4xOD17x3mm Thick Flat Washer
  • 2 – M6x1.0x45mm Socket Head Cap Screw (Long Pinch Bolt)
  • 10 – ID6.4xOD12.5x1.4mm Thick Flat Washer
  • 3 – 14mm Torx-Head Plastite Screw (Cable Bracket, EGR)
  • 1 – M6x1.0 Square Nut (Throttle Cable Bracket)
  • 10 – M6x1.0x<> Socket Head Cap Screw (Cylinder Head)
  • <> = 100mm for 2701,27013, 27014
  • <> = 110mm for 2702
  • 4 – M6x1.0x40mm Socket Head Cap Screw (Electronic Throttle Body only)

 

View AllClose

Warranty Information

MSD warrants this product to be free from defects in material and workmanship under its intended normal use*, when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of the original purchase. This warranty is void for any products purchased through auction websites. If found to be defective as mentioned above, it will be repaired or replaced at the option of MSD. Any item that is covered under this warranty will be returned free of charge using Ground shipping methods. This shall constitute the sole remedy of the purchaser and the sole liability of MSD. To the extent permitted by law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall MSD or its suppliers be liable for special or consequential damages. * Intended normal use means that this item is being used as was originally intended and for the original application as sold by MSD. Any modifications to this item or if it is used on an application other than what MSD markets the product, the warranty will be void. It is the sole responsibility of the customer to determine that this item will work for the application they are intending. MSD will accept no liability for custom applications.
View AllClose

Related Products

Related Products

FAST LSXHR™ 103mm LS7 Raised Intake Manifold 146204 FAST LSXHR 103mm LS7 Intake Manifold 146204
Add to Cart

FAST LSXHR 103mm LS7 Intake Manifold 146204

FAST

$1,163.95
FAST LSXHR™ 103mm LS7 Intake Manifold 146204 FAST® has developed the industry's first polymer tunnel ram-style intake manifold, ideal for generating maximum power in boosted and naturally aspirated...
146204
FAST LSXHR 103mm LS3 Intake Manifold 146106 FAST LSXHR 103mm LS3 Intake Manifold 146106
Add to Cart

FAST LSXHR 103mm LS3 Intake Manifold 146106

FAST

$1,261.95
FAST LSXHR™ 103mm LS3 Intake Manifold 146106 FAST® has developed the industry's first polymer tunnel ram-style intake manifold, ideal for generating maximum power in boosted and naturally aspirated...
146106
FiTech 92mm Cathedral Port Loaded Intake Manifold Kit (70071)
Add to Cart

FiTech LS7 92mm Loaded Intake Manifold Kit

FiTech Fuel Injection

$965.00
FiTech LS7 92mm Loaded Intake Manifold Kit Kit Includes:   Low profile 92mm inlet, aluminum fabricated intake with 1500-6500 rpm power-band, 3mm construction tig welded, black anodized with...
70077