VORTECH SUPERCHARGERS
V-30 123A Race Supercharger Head Unit Black - CW Rotation/Straight Discharge
- PART NUMBER:
- 2G478-044
- MPN:
- 2G478-044
- Availability:
- Ships from Manufacturer
- Shipping:
- Free Over $98 In U.S. 48
- Type:
- Centrifugal Superchargers
- Supercharger Finish:
- Black
- Model:
- V-30 123A
- Max Boost (psi):
- 45+
- MAX POWER (HP):
- 2800+
- MAX FLOW (CFM):
- 4000+
- MAX IMPELLER RPM:
- 65000
- Internal Set-Up Ratio:
- 4.21:1
- Discharge OD (IN.):
- 4.00
- Inlet OD (IN.):
- 6.00
- Discharge ID (IN.):
- 3.75
- Inducer Diameter (IN.):
- 4.843
Description
V-30 123A Race Supercharger Head Unit Black - CW Rotation/Straight Discharge
The V-30 123A Supercharger is a new compressor, replacing the existing V-28 123, and features a plethora of cutting-edge technology, including its technologically advanced, high-efficiency, 5-Axis machined billet impeller and high-diffusion housing developed in our SAE-J1723-compliant supercharger test cell.
Built to address the needs of the over 1,000HP racer, the V-30 is a clean sheet design that incorporates many years of racing compressor knowledge. The patented design employs a unique impeller shaft support system that is robust enough to endure the speeds and accelerations associated with high horsepower drag racing and the durability to perform well in the offshore boat-racing world. The modular design allows fitment of a wide range of compressor stages. All V-30 series superchargers share a 4.21:1 internal step-up ratio and are engine oil lubricated or an auxiliary system can be fabricated. Like the V-1 family, the V-30 can have different compressor stages.
Performance Specs
- Internal Step-Up Ratio: 4.21:1
- Max Speed: 65,000 RPM
- Max Boost: 45+ PSI
- Max Flow: 4,000+ CFM
- Max Power: 2,800+ HP
- Peak Efficiency: 83%+
Dimensions
- Discharge OD: 4.0"
- Inlet OD: 6.0"
- Discharge ID: 3.75"
- Inducer Diameter: 4.843"
The V-30 123A supercharger is designed to provide up to 45 PSI in extreme drag racing applications. Recommended to racers who are building for 6-second ET's in Super Street and Outlaw racing classes.
This supercharger has powered Vortech Supercharged racers to mid-6 second quarter mile passes at over 212 mph in PSCA Outlaw 10.5.
Its 83%+ peak efficiency surpasses all other competing superchargers, allowing for higher boost at cooler discharge temperatures.
Other, less efficient superchargers may be able to provide equal or greater levels of boost, but do so at higher discharge temperatures and with greater parasitic power loss.
Racers who switch from a competing supercharger to the 123A will be capable of lower ET's and faster top speeds due to its higher efficiency, lower discharge temperatures, and greater power potential.
The extreme durability of the V-30 supercharger design allows a single head unit to be used for multiple quarter-mile passes before being replaced, under the same conditions that cause competing superchargers to wear down and need replacement after one or two passes.