Tools

Goodson 1.500" OD Valve Spring Seat Cutter VSS-1500 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.500" ID: 0.625"

Goodson 1.540" 3D Bounce Spring Micro Ball Head Tooling 3D-BS3 Use these Bounce Springs with your 3-D Fast Cut Micro Ball Head tooling to ensure high quality valve seats. Bounce Springs help prevent the tooling from dropping onto...

Goodson 1.500" OD Valve Spring Seat Cutter VSS-1550 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.550" ID: 0.625"

Goodson 1.600" Replacement Jaw for Valve Spring Compressor GSC-1000 These accessories and replacement parts below are for your Goodson GSC-1000 Pneumatic Spring Compressor. NOTE: These parts are NOT interchangeable with the CF-3000B...

Goodson 1.625" Heavy Duty Valve Spring Adaptor  These heavy duty valve spring adaptors fit most common valve spring compressors Welded construction helps prevent jaw kick-off or twisting normally associated with spring compressor jaws Use with...

Goodson 1.625" OD Valve Spring Seat Cutter VSS-1625 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.625" ID: 0.625"

Goodson 1.680" OD Valve Spring Seat Cutter VSS-1680HD Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.680" ID: 0.750"

Goodson 1.682" Max. Dia. Expanding Segment Set CBT-6M These expanding segments with sleeves adjust to undersize bearings so you can remove an install them from virtually any block. Includes segements and sleeves. Replacement sleeves are available.

Goodson 1.750" OD Valve Spring Seat Cutter VSS-1750 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.680" ID: 0.750"

Goodson 1.875" Max. Dia. Expanding Segment Set CBT-7M These expanding segments with sleeves adjust to undersize bearings so you can remove an install them from virtually any block. Includes segments and sleeves. Replacement sleeves are available.

Goodson 1/2" dia. Deep Well Port Brush DEB-5 ULTRA DUTY - Top-quality brushes aggressively remove carbon deposits, gasket material, and normal dirt. Wire Gauge: .020", 2-1/2" long. As brush wears, cut back spring to expose new wire.

Goodson 1/2" Dia. Half-Tapered Cartridge Rolls 50 Pk. These 1/2" diameter Half-Tapered Cartridge Rolls are 1-1/2" long with a 1/8" hole for your mandrel. Packaged 50 per box. Fully glued.