Tools

Goodson 48" Driver for Cam Bearing Tool CBT-4B Drive cam bearings with confidence with this 48" long driver. Steel construction. Includes threaded impact cap.

Goodson 5" Diameter Aluminum-Oxide Chamfering Cones for CC-130 Mandrel Use these large diameter cones to chamfer the top of the cylinder to an exact 45° angle in a single pass Cone height is 3-1/2" Aluminum-Oxide Abrasive available in 3...

Goodson 5" Diameter Premium Zirconia Chamfering Cones Use these large diameter cones to chamfer the top of the cylinder to an exact 45° angle in a single pass Cone height is 3-1/2" Use with the 5" Chamfering Cone Mandrel (CC-130)

Goodson 5" Driver for Cam Bearing Tool CBT-1B Drive cam bearings with confidence with this 5" long driver. Steel construction. Includes a threaded impact cap.

Goodson 5" Lisle Clip On Honing Stone Sets Goodson 5" long stones and wipers cut faster and last longer. Each set contains two stones and two wipers. Clip on style mounts in seconds. Use dry.  

Goodson 5.0mm Bronze-Liner Guides Bronze-Liners from Goodson are made of phosphor bronze. These Bronze-Liners will outlast original guides and are easy to replace. All Bronze-Liners feature a cross-hatch to promote oil retention and the rounded nose...

Goodson 5.5mm Bronze-Liner Guides Bronze-Liners from Goodson are made of phosphor bronze. These Bronze-Liners will outlast original guides and are easy to replace. All Bronze-Liners feature a cross-hatch to promote oil retention and the rounded nose...

Goodson 5/16" Replacement Carbide Cutting Insert DKB-7 Measures 5/16" square x 1/8" thick Sold individually but Goodson recommends replacing both inserts at the same time    

Goodson 5/8" Dia. 60 Grit Full-Tapered Cartridge Rolls 50 Pk. Goodson 5/8" Dia. 60 Grit Full-Tapered Cartridge Rolls 50 Pk.

Goodson 5/8" Dia. 80 Grit Full-Tapered Cartridge Rolls 50 Pk. These full-tapered cartridge rolls are 1-1/2" long with a 1/8" hole and are fully glued to hold together better. 50 per box.

Goodson 5/8" x 4" Right-Hand Brake Drum Cutting Tool R-4 • For Heavy-duty cutting of Cast Iron Hubs on Drum Lathes• Replaces OE Nos. Bear 24034 and Star CB-35• Measures 5/8" square x 4"L

Goodson 50 Grit Roloc Bristle Discs Use these 50 Grit Green Roloc Bristle Discs to remove foreign materials from alumimum, cast, steel, gasket or flat mating surfaces. Abrasive grain is embedded in plastic bristles that break down to expose...