Tools

Goodson Rust Proofing Oil RPO-10 Apply full strength. Creates a protective film. Washes off with standard solvents. Brush on.

Goodson Rust Shield for Shop Equipment RS-128 Stops rust without causing rancidity. Apply to machine parts such as ways to keep them rust-free longer. Mixes with coolant - no need to remove it before using the machine.

Goodson Screw Feed Dust Boot for Ammco 3086 Screw Feed Dust Boot for the Ammco 3000, 4000, 4100, 7000 and 7700 brake lathes. Keep extras on hand to routine maintenance or emergency replacement.

Goodson Seal-All Head & Block Sealer 32 oz. CPS-32 Seals pin holes, porosity and small cracks in heads and blocks Polymer fluid penetrates and seals Out-performs ceramics Bonds with existing rust and corrosion to prevent spread Heat at...

Goodson Seal-Lock Fluid Weld Sealant 2 oz. FW-2 Fluid Weld is used for cast iron or aluminum heads and blocks. Use as a sealant for threaded or press-fit parts such as valve guides and seats, threaded crack repair plugs, replacement studs, etc...

Goodson Seal-Lock Fluid Weld Sealant 8.8 oz. FW-88 Fluid Weld is used for cast iron or aluminum heads and blocks. Use as a sealant for threaded or press-fit parts such as valve guides and seats, threaded crack repair plugs, replacement studs, etc...

Goodson Seat Stone Removal Base-Sioux SX-SRT Once in a while a valve seat stone will become so tight on the stone holder that it's almost impossible to get it off. That's why Goodson developed this tool. Simply fasten it to your bench with screws or...

Goodson Serpentine Drive Belts for Ammco Lathes 2 lengths to choose from Use with Serpentine Style Drive Pulleys Fits Ammco brake lathe models 3000, 4000, 4100, 7000 and 7100

Goodson Serpentine Style Pulley Set GT-5001 Includes 2 pulleys and a 20-1/4" belt Serpentine style Serpentine style runs quieter and increases arbor speed by 175 RPM Virtually eliminates vibration.

Goodson Silicon-Carbide Resurface Segment GS-PBS Use the GS-PBS /Silicon-Carbide Abrasive Segments to resurface Cast Iron & Aluminum heads on your Peterson/Peterson Berco, Winona Van Norman and Storm Vulcan Cylinder Head Resurfacing...

Goodson Silicon-Carbide Resurface Segment GS-RGS Use the GS-RGS Silicon-Carbide Abrasive Segments to resurface Cast Iron and Aluminum heads on your Peterson/Peterson Berco,  Cylinder Head Resurfacing Machines (see below for models). 1...

Goodson Silicon-Carbide Resurface Segment GS-SVS Use the GS-SVS Silicon-Carbide Abrasive Segments to resurface Aluminum and Cast Iron cylinder heads on your Peterson/Peterson Berco or Storm Vulcan Cylinder Head Resurfacing Machines (see below)...