Tools

Goodson 1.625" OD Valve Spring Seat Cutter VSS-1625 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.625" ID: 0.625"

Goodson 1.500" OD Valve Spring Seat Cutter VSS-1550 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.550" ID: 0.625"

Goodson 1.500" OD Valve Spring Seat Cutter VSS-1500 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.500" ID: 0.625"

Goodson 1.350" OD Valve Spring Seat Cutter VSS-1350 Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.350" ID: 0.625"

Goodson 1.320" OD Valve Spring Seat Cutter VSS-1320  Recut valve spring seats to establish spring-to-valve concentricity or use to enlarge seats for over size dual springs. Must be used with Hardened Ground Pilots. OD: 1.320" ID: 0.630"

Goodson 1.625" Heavy Duty Valve Spring Adaptor  These heavy duty valve spring adaptors fit most common valve spring compressors Welded construction helps prevent jaw kick-off or twisting normally associated with spring compressor jaws Use with...

Goodson 1.000" - 1.875" Replacement Valve Spring Adaptor Jaws CF-44 Description: Large openings for easy access to keepers in heads with small recessed springs Fits frames with double locking screws to secure jaws such as Goodson CF-2002, CF-2004,...

Goodson Chamfering Cone 120-Grit CC-62 Description: Use these 1-1/2" diameter chamfering cones with the Goodson CC-60 mandrel (sold separately) Choose from 80 or 120 grit Aluminum-Oxide abrasive

Goodson Chamfering Cone 80-Grit CC-61 Description: Use these 1-1/2" diameter chamfering cones with the Goodson CC-60 mandrel (sold separately) Choose from 80 or 120 grit Aluminum-Oxide abrasive

Chamfering Mandrel 1-1/2" 60 Degree The mandrel is designed to support a 60º abrasive cone which is held securely by the retaining ring. One 80-grit cone is included with initial purchase. Description: 1/2" shank 1-1/2" diameter Ideal for...

Fragola Fire Sleeves Ultra Light-Weight Resin-coated fiberglass sleeve good for up to 1200 degrees. Available in black only. ***Select the number of feet that you need by the quantity. Ex. Quantity 10 = 10 continuous feet*** Size RangeBulk Part...

Holley LS7 Wet Sump Conversion Dipstick Drill Jig 302-31 When installing a LS7 with a dry sump system into your project, you will need to modify a few items on the engine before installation of the wet sump system. The Holley dipstick drill guide is a...