Tools

Goodson Exhaust Trigger Assembly for Valve Spring Compressor GSC-1000 These accessories and replacement parts below are for your Goodson GSC-1000 Pneumatic Spring Compressor. NOTE: These parts are NOT interchangeable with the CF-3000B...

Goodson Exhaust Valve Seat Cutter Blade EFT-5557B-HP Increase CFM with these blade profiles developed and tested by Joe Mondello exclusively for Goodson. Used with any of the popular 3-angle valve seat cutting systems including Goodson's exclusive 3-D...

Goodson Exhaust Valve Seat Cutter Blade IFT-1556-HD Fit most popular 3-angle seat cutting systems including Kwik-Way, Newen, Peterson, Rottler, Serdi, Sunnen, T&S, Winona Van Norman, etc. • Profile: 15º • Radius: 6.0mm

Goodson Exhaust Valve Seat Cutter Blade IFT-5025B-HP Fit most popular 3-angle seat cutting systems including Kwik-Way, Newen, Peterson, Rottler, Serdi, Sunnen, T&S, Winona Van Norman, etc. • Profile: 47º / 50º • Radii (top to...

Goodson Extra Long Manual Valve Guide Drivers Driving face has 1 degree negative angle to keep guides from mushrooming while being driven Pilots are slightly smaller than guide I.D. to remove easily without scratching bore Pilot approximately 1...

Goodson Extra-Long Pneumatic Valve Guide Drivers 7.5" long 1° negative angle to prevent guide mushrooming Pilots are slightly smaller than the guide ID for easy removal Rockwell Hardness of 45 - 50

Goodson Feeler Gauge Kit FE-KIT Use to measure piston-to-wall clearance when honing, to find ring end gap & to check cylinder heads with a straight-edge.

Goodson Fine Ring Deburring Abrasive Stick RS-103 This fine abrasive stick is radiused for easier ring deburring after end-gapping. Measures 4"L x 1/2" radius. Works on all types of rings and all ring IDs. TECH TIP: Fine abrasive sticks work...

Goodson First Lube for Dry Engine Start Up  Prevent dry engine start ups after long-term storage. Clings and forms a slick wall between moving parts. Withstands start-up pressures. Compatible with all motor oils.  

Goodson Flow-Through Parts Brush PWB-FLO-1 Its unique flow-through design makes the Flow-Through Parts Brush ideal for use in a parts washer. The 24" long hose slides over the discharge nozzle in the parts washer, allowing you to direct cleaning...

Goodson Flywheel Cutter Tip VN-FW 3-edge carbide cutting tip For use with special flywheel attachment on the Winona Van Norman 570 Rotary Broach .700" wide, .185" thick

Goodson Flywheel Depth Gauge FGG-12 Measure flywheel before and after grinding to maintain proper depth specifications Gauge assembly includes dial indicator, bar and magnets Spindle extensions sold separately