Tools

Goodson Hand Held Hard Silicon-Carbide Dressing Stick GG-112 1" x 1" x 6"L Use to deglaze wheel side Removes material with light pressure Hard silicon-carbide

Goodson Hand-Held Dresser FG-1045-G This hand-held dresser can be used for dressing flywheel grinding stones or cylinder head resurfacing wheels or segments. Uses replacement stone number FG-1044-G.

Goodson Hand-Held Norbide Dressing Stick DS-NOR Dense, granular Norbide For fine tuning radius and side relieving wheels Measures 3/16" x 1/2" x 3"

Goodson Head Bolt Spot Facer HBF-15 Spot face head bolt seat parallel to new deck surface after angle milling Allows proper head bolt torquing Cutting tip .060" radius matches OE design to avoid stress points and cracks 0.468" shank with flat Use...

Goodson Head/Block Round Warp Gauge EWG-100 Check head and block warp with this tool steel warp gauge. The 3/4" diameter tool steel bar is 26" long and includes an anti-roll collar and eye bolt allowing you to hang it for safe storage. Use with feeler...

Goodson Heavy Duty Air Hammer 3500 bpm AH-335 Heavy-duty driver delivers 3500 blows per minute Weighs 3lbs. 0.401" tool opening 25 SCFM (3.5 CFM @ 90 PSI) Air consumption Recommended air hose size: 3/8" Air Inlet: 1/4" NPT Stroke Length:...

Goodson Heavy Duty Brake Lathe Centering Cones These centering cones for mounting rotors and drums on the brake lathe are available in several sizes. Sized to fit brake lathes with 1" diameter arbors.

Goodson Heavy Duty Dresser Pilot 031-0202-47 Use with .375" stone holder. OAL: 6-3/8". Fit both the Universal Valve Seat Wheel Dressing Stand and the Heavy Duty Valve Seat Wheel Dresser

Goodson Heavy Duty Dresser Pilot 031-0202-55 Use with .385" stone holder. OAL: 6". Fit both the Universal Valve Seat Wheel Dressing Stand and the Heavy Duty Valve Seat Wheel Dresser

Goodson Heavy Duty Dresser Pilot 031-0202-80 Use with .437" hex-drive or flex-drive stone holder. OAL: 7-1/4". Fit both the Universal Valve Seat Wheel Dressing Stand and the Heavy Duty Valve Seat Wheel Dresser

Goodson Heavy Duty Dresser Pilot 031-1102-89 Use with .437" hex-drive stone holder. OAL: 5-9/16". Fit both the Universal Valve Seat Wheel Dressing Stand and the Heavy Duty Valve Seat Wheel Dresser

Goodson Heavy Duty Manual Vacuum Tester DVC-101-HD Metal pump and housing Holds vacuum indefinitely Built in relief valve Kit includes pump, a 4.75" plate with Robinair fitting and Plate Lube NOTE: Any DVC plate with work with this pump (see...